Leakage point for pump mechanical seal

The pump mechanical seal means that the installation of the dynamic sealing effect of the installation runs in the pump device, and the leak point of the device needs to be understood during use, so as not to use improper use, the equipment is damaged, and the leakage situation is increased.


(1) the seal of the shaft sleeve and the shaft;

(2) Sealing between the articles and the bushing;


Pump mechanical seal


(3) Moving, static ring seal;

(4) Sealing of the static ring and the static ring;

(5) Sealed end cap and the seal between the pump body.


In general, the leakage between the pump is more likely to discover and solve the leakage between the sealing end cap and the pump body, but it is necessary to observe, especially when the working medium is a liquefied gas or high pressure, toxic and harmful gas. It is relatively difficult. It is difficult to disclaimer and judging the remaining leaks, and must be observed, analyzed and developed by long-term management and maintenance practice.

Comments

Popular posts from this blog

Microfabrication of biomedical lab-on-chip devices. A review/Biomeditsiiniliste kiiplaborite valmistamine.

Missing in the Park: Bizarre Disappearances in National Parks

wifi paddle boat.